Buying a shower handle without checking measurements is the single biggest mistake most DIYers make. The matte black shower door handle you pick should match hole spacing, glass thickness, and the door type – miss one spec and you end up with a loose pull or wasted drill holes. This Ranbo 8″ tubular back-to-back pull fits 6–12mm glass and 35–55mm wood or metal doors, so it avoids that trap. Who wants a return trip to the hardware store?
Simple hardware can transform a bathroom. This 8 inch tubular pull uses a 3/4″ diameter bar, metal washers, and rubber sleeves to protect glass and create a solid, ergonomic grip for everyday use. It’s a small change with a big design payoff.
Key Features & Real-World Use
- Compatibility: Works with 6–12mm (1/4″–1/2″) glass and 35–55mm (1-3/8″–2-1/6″) wooden or metal doors.
- Mounting specs: 8″ (203mm) hole spacing with a recommended 1/2″ (12mm) drill diameter for clean installation.
- Protective sleeves: Includes 5mm sleeves for 6mm glass and 8mm sleeves for 8–12mm glass to prevent stress cracks and improve vibration damping.
- Durable fit: Tubular 3/4″ diameter pull with metal washers gives a secure back-to-back connection for shower, steam, or glass partition doors.
- Finish & ergonomics: Matte black finish resists fingerprints, pairs with matte fixtures, and offers a comfortable grab for towels and steady entry.
Who This Is For
Home renovators swapping out dated pulls, renters upgrading a temporary bathroom, or contractors fitting shower enclosures will appreciate this handle. If you have frameless glass, framed glass, or a thick wood door, the included rubber sleeves and metal washers cover common installation pain points.
It’s great for modern bathrooms, wet-room layouts, and anywhere you want a minimal, corrosion-resistant door pull that also supports towel handling and light leverage.
How to Choose
- Match glass thickness: Verify your glass is 6–12mm. Use the 5mm sleeve for 6mm and the 8mm sleeve for thicker glass.
- Check door thickness: Ensure wood or metal doors are 35–55mm for proper spindle engagement and washer alignment.
- Measure hole spacing: Confirm 8″ (203mm) center-to-center hole spacing before drilling; this reduces correction work.
- Decide finish: Matte black pairs with matte faucets, towel bars, and matte tile for a cohesive look—but confirm hardware style first.
From Box to Daily Use
- Unpack and lay out the pull, washers, screws, and rubber sleeves on a soft towel to avoid scratches.
- Measure and mark 8″ (203mm) center-to-center on the glass or wood door; double-check vertical alignment.
- Drill a 1/2″ (12mm) hole where indicated; use a glass bit for glass and a wood bit for timber, and clamp securely.
- Fit the appropriate rubber sleeve over the spindle for a snug, protective fit against the glass.
- Assemble the back-to-back handles with metal washers and tighten evenly to avoid putting uneven stress on the glass.
- Wipe the matte finish with a microfiber cloth; avoid abrasive cleaners to preserve the coating.
Buyer Doubts Solved
- Will it fit frameless glass? Yes, the sleeves and 3/4″ spindle are designed for frameless and framed glass panels in the 6–12mm range.
- Is matte black durable? The finish is designed to resist fingerprints and mild corrosion in humid bathroom environments when cleaned gently.
- What if my holes are slightly off? A small alignment error can usually be corrected with careful re-drilling and filler plugs; measuring twice prevents this.
- Can I use it on a heavy door? For very heavy timber doors, confirm the 35–55mm thickness and consider reinforcing plates if needed for extra load support.
- How about maintenance? Routine wipe-down with mild soap and water keeps the finish and metal washers looking new; avoid bleach or harsh solvents.
Small upgrade, clear payoff: better grip, cleaner aesthetics, and hardware that matches modern plumbing and tile. If you value a lasting finish, easy installation, and compatibility with common glass and door thicknesses, this pull is a practical, stylish pick.
Some links are affiliate. As an Amazon Associate, I earn from qualifying purchases — at no extra cost to you. It helps keep these finds coming. Thanks for your support!
